Sony MSAC-US40 - Manual (Page 10)

10-GB
When using Windows 2000/Windows XP
The following restrictions apply when “SonicStage” is running under
Windows 2000/Windows XP.
• Installation should take place after you log on as Administrator.
For how to log on using the Administrator account, see the manual
provided with your computer.
• When using the software, log on as an Administrator.
• Do not insert or remove a CD-ROM drive while “SonicStage” is running.
Your important data may get lost.
• Can only be used with Windows 2000 Professional edition with Service
Pack 3 or later installed.
• NTFS format can only be used when standard-installed (installed when
shipped from the factory).
When using this unit on a computer with
Service Pack 3 of Windows 2000 installed
Performing the following operations may cause the unit not to be
recognized by your computer when using this unit on a computer with
Service Pack 3 of Windows 2000 installed:
1. Starting Windows with your computer on or rebooting while the
products in question are connected to your computer’s USB port.
2. Unplugging and plugging in the USB cable that is connecting the unit
and your computer after starting Windows.
tThe products in question will cease to be recognized by your
computer.
If the USB cable is not unplugged, these issues will not occur.
To avoid these issues
When starting Windows with your computer on or when rebooting
Windows, remove the USB cable that is connecting the products in
question and your computer.