Sony PCV-R545DS - Manual (Page 288)

the drive holder back so that the tabs slip into the notch at the bottom of the slot.
1. Replace the screws that secure the holder to the chassis.
2. Replace the cover and reinstall the screws, as described on Replacing the Cover .
Your computer automatically recognizes the new drive and configures itself accordingly when you
turn it on. Partition and format the new drive following the instructions provided with the drive.
Replacing the Cover
1. Align the three-sided outer panel over the chassis and lower it onto the unit. Be sure to slide
the panel onto the unit so that the tabs slip into the lips on the unit.
2. Replace the three screws at the center top, lower-left corner, and lower-right corner of the
metal backplate.
1. Replace the frame by inserting the three small tabs into the slots on the left side of the unit
and slipping the two larger tabs into the slots on the right side of the unit. Gently press the
Page 288