Sony HDR-UX10 - Manual (Page 75)

75
U
til
iz
ing t
h
e m
edi
a
b Notes
• It takes from a minute to a maximum of several
hours to finalize a disc. The shorter the amount
of material recorded on the disc, the longer it
takes for finalizing.
1
Place your camcorder in a stable
position, then connect the AC
Adaptor to the DC IN jack on your
camcorder and the wall outlet
(wall socket).
2
Turn on your camcorder.
3
Insert the disc to be finalized.
4
Touch (HOME) t
(MANAGE MEDIA) t
[FINALIZE].
To select a disc menu style, touch
(OPTION) t [DISC MENU].
If you do not change the setting of the
disc menu style, go to step 5. The disc
menu style is set to [STYLE1] (the
default setting).
5
Touch [YES] t [YES] t .
b Notes
• When you finalize a double-sided disc, you
must finalize each side of the disc individually.
• Do not apply shock or vibration to your
camcorder, and do not disconnect the AC
Adaptor during finalizing.
When you need to disconnect the AC Adaptor,
make sure that the power of your camcorder is
set to off and disconnect the AC Adaptor after
the
(Movie) or (Still) lamp goes off.
Finalizing restarts when you connect the AC
Adaptor and turn on your camcorder again.
• When finalizing the following discs, flashes
after finalizing is completed. Remove the disc
from your camcorder.
– Discs recorded with HD (high definition)
image quality
– Discs recorded with SD (standard definition)
image quality, except DVD-RW (VR mode)
z Tips
• When you set to create a disc menu (or DVD
menu) and finalize the disc, the disc menu
appears for a few seconds while finalizing the
disc.
• After the disc is finalized, “ ” is attached
at the bottom of the indicator, such as “ ”
in the case of DVD-RW.
To select a disc menu style
1 In step 4, touch (OPTION) t
[DISC MENU].
2 Select the desired style from 4 types of
pattern with
/ .
Select [NO MENU] if you do not create
a disc menu.
3 Touch .
b Notes
• During Easy Handycam operation, the disc
menu is fixed to [STYLE1].
Finalizing a disc
Continued ,