Sony HDR-UX10 - Manual (Page 95)

95
Cu
st
om
iz
ing y
our c
a
m
co
rde
r
OUTPUT SETTINGS
(Items for connecting other devices)
Touch 1, then 2.
If the item is not on the screen, touch
/
to change the page.
How to set
(HOME MENU) t page 84
The default settings are marked with B.
You need to convert the signal depending
on the TV connected when playing back the
image. The recorded images are played
back as following illustrations.
B 16:9
Select to view your images on a 16:9
(wide) TV.
4:3
Select to view your images on a 4:3
standard TV.
TV TYPE
16:9 (wide)
images 4:3 images
16:9 (wide)
images 4:3 images
b Notes
• The aspect ratio of the image recorded with HD
(high definition) image quality is 16:9.
• When you connect your camcorder to a TV
compatible with the ID-1/ID-2 system, set [TV
TYPE] to [16:9]. The TV switches to full mode
automatically. Refer also to the instruction
manuals supplied your TV.
B LCD PANEL
Shows displays such as the time code on
the LCD screen and in the viewfinder.
V-OUT/PANEL
Shows displays such as the time code on
the TV screen, LCD screen, and in the
viewfinder.
Select [COMPONENT] when connecting
your camcorder to a TV with the
component input jack.
480i
Select when connecting your camcorder to
a TV with the component input jack.
B 1080i/480i
Select when connecting your camcorder to
a TV that has the component input jack
and is capable of displaying the 1080i
signal.
DISP OUTPUT
COMPONENT