Sony RDH-SK8iP - Manual (Page 12)

model name [RDH-SK8iP]
[4-166-642-12(1)] GB
12 GB
filename[D:\NORM'S JOB\SONY HA\SO0080\RDH-SK8iP\GB\GB05CON.fm] masterpage:Left
Changing the battery
The working distance of the remote
shortens as the battery becomes
exhausted. When the remote no longer
operates the unit, replace the battery with
a new CR2025 lithium battery.
1
Push and hold the latch of the
battery holder, then pull out the
battery holder.
2
Replace the battery with the “+”
facing up, then insert the battery
holder into the slot.
Notes
• If you do not use the remote for a long period
of time, remove the battery to avoid possible
damage from battery leakage and corrosion.
• Dispose of used battery promptly. Keep the
lithium battery out of the reach of children.
Should the battery be swallowed, immediately
consult a doctor.
• Wipe the battery with a dry cloth to assure a
good contact.
• Be sure to observe the correct polarity when
installing the battery.
• Do not hold the battery with metallic
tweezers, otherwise a short-circuit may occur.
• Use of batteries other than the CR2025 may
cause a fire or explosion. Latch
+ facing up
Battery
holder
WARNING
Battery may explode if mistreated.
Do not recharge, disassemble or
dispose of in fire.