AVerMedia Technologies EB1504 MPEG4 - Manual (Page 12)

8
1.5.2 Connecting Devices
The back panel of the DVR unit, you can connect up to 4 video cameras, 4 sensor
devices, 1 alarm device and output video to a TV or CRT/LCD monitor. Connecting
the unit to a PC, through USB connection, the bundled software enables you to
transfer, playback and segment the video.
Follow the illustration below to make the connection:
VGA TV
CRT/LCD Monitor
Microphone
-
The DVR unit supports 2 video output ports and you can only select
ONE to output the video either from the VGA OUT or VIDEO OUT.
The unit would not be able to display the video properly if you
connect the device on both VGA OUT or VIDEO OUT at the same
time.
- Each time you change the video display output, the power must be
UNPLUGGED and PLUGGED to reset.