Sony RHT-G800 - Manual (Page 47)

47 US
Ad
diti
onal
Inf
o
rma
tion
Formats supported by this
stand
Digital input formats supported by this stand are
as follows.
* Linear PCM accepts sampling frequencies of no
more than 48 kHz.
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 6 ohms loads, both channels driven, from 200 -
20,000 Hz; rated 50 Watts per channel minimum RMS
power, with no more than 1 % total harmonic distortion
from 250 milli Watts to rated output.
Amplifier section
Reference Output Power
Surround mode
Front: 70 Watts + 70 Watts
(6 ohms at 1 kHz,
THD 10 %)
Center*: 70 Watts (3 ohms
at 1 kHz, THD 10 %)
Surround*: 70 Watts +
70 Watts (6 ohms at 1 kHz,
THD 10 %)
Subwoofer: 120 Watts
(3 ohms at 100 Hz,
THD 10 %)
* Depending on the sound field settings and the source,
there may be no sound output.
Inputs (Analog)
TV, AUDIO
Sensitivity: 600 mV
Impedance: 33 kohms
Inputs (Digital)
TV, DVD/BD,
Optical
SAT Coaxial, optical
HDMI section
Connector HDMI 19pin-standard
connector
Video inputs/outputs SAT, DVD/BD: 480i/480p/
576i/576p/720i/720p/
1080i/1080p
Audio inputs SAT, DVD/BD INPUT:
Linear PCM 7.1ch/
Dolby Digital/ DTS
Speakers
Front
Speaker system 2-ways, Bass reflex,
magnetically shielded type
Speaker units Woofer: 4 × 7 cm (1 5 / 8 ×
2 7 / 8 inches) cone type
Tweeter: 2.5 cm (1 inch)
dia. Balanced dome type
Center
Speaker system Bass-reflex, magnetically
shielded type
Speaker unit 4 × 7 cm (1 5 / 8 × 2 7 / 8
inches) cone type × 2
Surround
Speaker system Bass reflex, magnetically
shielded type
Speaker unit 4 × 7 cm (1 5 / 8 × 2 7 / 8
inches) cone type × 2
Subwoofer
Speaker system Bass reflex, magnetically
shielded type
Speaker unit 10 cm (4 inches) cone type
× 2
Format Supported/Not supported
Dolby Digital a
DTS a
Linear PCM (2ch)* a
Linear PCM (5.1ch,
7.1ch)* (Only on
HDMI) a
Dolby Digital Plus ×
Dolby True HD ×
DTS-HD ×
continued