Sony HT-XT1 - Manual (Page 9)

9 US
Useful functions
One-Touch connection using the Android device with the
NFC function built-in (NFC)
1
Perform steps 1 to 3 of “When using an Android device.”
2
After the BLUETOOTH connection display appears on the
Android device, touch the Android device with the N mark of
the system.
When the connection has been established, the illumination LED
(blue) of the system lights.
3
Operate the system with the display of the Android device.
1
Touch the  (on/standby) touch key of the system.
The display of the system lights after the system turns on.
2
Touch the PAIRING touch key of this system.
The illumination LED (blue) of the system flashes quickly during
BLUETOOTH pairing.
3
Set the iPhone/iPod touch to pairing mode and select
“SONY:HT-XT1” from the BLUETOOTH device list on the
iPhone/iPod touch.
When the connection has been established, the illumination LED
(blue) of the system lights.
4
Search for “SongPal” with the connected iPhone/iPod touch
and download that application.
5
Run “SongPal” then operate the system with the display of
the iPhone/iPod touch.
Illumination LED (blue)
When using an iPhone/iPod touch