Using a wall-mount bracket, Installing the tv against a wall or enclosed area – Sony KDL-55W900A User Manual

Page 21

Advertising
background image

D:\SONY TV\SY130150_H1 (Rev-1)\4447572121_US\US03STU.fm

KDL-55W900A

4-447-572-12(1)

21

Getting Started

Using a Wall-Mount
Bracket

Your TV can be mounted on a wall using a
Wall-Mount Bracket (not supplied) out of the
box as packaged. If the Table-Top Stand is
attached to the TV, the TV may require
detaching the Table-Top Stand; see
page 11 (Detaching the Table-Top Stand
from the TV).
Prepare the TV for the Wall-Mount Bracket
before making cable connections.

• Follow the instruction guide provided

with the Wall-Mount Bracket for your
model. Sufficient expertise is required in
installing this TV, especially to determine
the strength of the wall for withstanding
the TV’s weight.

• The length of the screw for Wall-Mount

Bracket differs depending on the
mounting hook thickness. Please see
below illustration.

• Be sure to store the unused screws and

Table-Top Stand in a safe place until you
are ready to attach the Table-Top Stand.
Keep the screws away from small
children.

~

• Read the supplied Safety Booklet for

additional safety information.

Installing the TV
against a wall or
enclosed area

Make sure that your TV has adequate
ventilation. Allow enough space around the
TV as shown in the illustration.

~

• Inadequate ventilation can lead to

overheating of the TV and may cause
damage to your TV or cause a fire.

8-12 mm

Screw

Mounting Hook

Hook attachment on rear of
TV set

Leave at least this much space around the set.

Installed with stand

4 inches

(10 cm)

11

7

/

8

inches

(30 cm)

4 inches

(10 cm)

2

3

/

8

inches

(6 cm)

Installed on the wall

Leave at
least this
much space
around the
set.

4 inches

(10 cm)

4 inches (10 cm)

4 inches

(10 cm)

11

7

/

8

inches

(30 cm)

Never install the TV set as follows:

Air circulation is blocked.

Air circulation is blocked.

Wall

Wall

Advertising