Sony HCD-DX150 - Manual (Page 75)

Se
tting
s an
d A
d
ju
stme
nts
75 GB
Use this to set up playback related and other
settings.
Select [CUSTOM SETUP] in the Setup Display.
To use the display, see “Using the Setup
Display” (page 71).
The default settings are underlined.
x [PAUSE MODE] (DVD VIDEO/DVD-RW
only)
Selects the picture in pause mode.
x [TRACK SELECTION] (DVD VIDEO only)
Gives the sound track which contains the highest
number of channels priority when you play a
DVD VIDEO on which multiple audio formats
(PCM, DTS, MPEG audio, or Dolby Digital
format) are recorded.
• When you set the item to [AUTO], the language may
change. The [TRACK SELECTION] setting has
higher priority than the [AUDIO] settings in
[LANGUAGE SETUP] (page 72). (Depending on
the disc, this function may not work.)
• If PCM, DTS, Dolby Digital sound, and MPEG audio
tracks have the same number of channels, the system
selects PCM, DTS, Dolby Digital sound, and MPEG
audio tracks in this order.
x [MULTI-DISC RESUME] (DVD VIDEO/
VIDEO CD only)
Switches the Multi-disc Resume setting on or
off. Resume playback point can be stored in
memory for up to 40 different DVD VIDEO/
VIDEO CD discs (page 30).
x [AUDIO DRC] (Dynamic Range Control)
(DVD VIDEO/DVD-RW only)
Narrows the dynamic range of the sound track.
Useful for watching movies at low volume late
at night.
• [AUDIO DRC] only applies to Dolby Digital sources.
x [DivX] (Asian, Australian, and Saudi
Arabian models only)
Displays the registration code for this system.
For more information, go to
http://www.divx.com on the Internet.
Custom Settings
[CUSTOM SETUP]
[AUTO] The picture, including subjects
that move dynamically, is output
with no jitter. Normally select this
position.
[FRAME] The picture, including subjects
that do not move dynamically, is
output in high resolution.
[OFF] No priority given.
[AUTO] Priority given.
Note
MULTI-DISC RESUME:
CUSTOM SETUP
AUTO PAUSE MODE:
OFF TRACK SELECTION:
ON
AUDIO DRC: STANDARD
[ON] Stores the resume settings in
memory for up to 40 discs.
[OFF] Does not store the resume settings
in memory. Playback restarts at
the resume point only for the
current disc in the system.
[OFF] No compression of dynamic
range.
[STANDARD] Reproduces the sound track with
the kind of dynamic range that the
recording engineer intended.
[MAX] Compresses dynamic range at the
maximum.
Note