Creating a video dvd, One touch recording and video recording, Writable discs that can be used – Sony VRD-MC1 User Manual
Page 12
12
VRD-MC1
2-661-941-02 (1)
masterpage:Left
G:\#sagyou\Sony\01 TV\836599S VRD-MC1\0119 VRD-MC1i\0119 VRD-MC1 kai nou-
hin\2661941011\2661941011\2661941011 VRD-MC1\GB05OPE1.fm
Creating a Video DVD
You can use this DVDirect as a stand-alone DVD recorder to burn videos on
DVDs directly from a connected video camera or video device such as VCR/
DVR/PVR.
You can play the created video DVD with other DVD devices, or the DVD
drives of computers.
Two types of recording are available to create video DVD; one touch recording
and video recording.
Video recording (
Record video DVD by operating DVDirect and the connected video devices
with buttons such as
(Record) and
(Stop) of DVDirect, or the play,
pause and stop buttons of the video device. Any video devices with video
output jack will be recordable.
One touch recording (DV Full Dubbing feature) (
When connecting your digital video camera* with a DV jack to DVDirect
using a DV (i.LINK) cable, you can burn the entire contents of a tape recorded
by your digital video camera on a DVD with one touch of
(Record).
DVDirect controls the digital video camera for the whole process, and
completes creation of the video DVD.
* DV or Digital8 camcorder only. MICROMV camcorder is not supported.
To create a video DVD, you can use DVD+R, DVD+R DL (double layer disc),
DVD-R, DVD+RW, or DVD-RW disc.
See “Compatible writable discs” for details. (
Notes on creating a video DVD
• You cannot record videos with copy protected signals (commercial DVD, VHS software,
some programs from satellite receiver or CATV receiver, etc.).
• You cannot make incremental recordings on discs that have been created using a computer
or other DVD recorder.
One touch recording and video recording
Writable discs that can be used
GB01COV1.book Page 12 Thursday, January 19, 2006 7:25 PM