Audiovox AVR-1228 - Manual (Page 30)

Using advanced features
Searching a cassette tape for programs (indexing)
When you record programs, the VCR places an index
mark at the start of the recording. To search for an index
mark:
1 Press MENU to display the menu.
2 Press 4 to choose Preferences.
3 Press 4 to choose Index Search.
4 If you want to search through a certain number of
index marks, press two number buttons to enter the
number of marks you want to search. Press CLEAR on
the remote to correct an entry.
5 Press REW to search backward or FF to search
forward. The VCR will locate your index mark and
begin playback. If you did not enter a specific index
number, the VCR will locate the next index mark and
begin playback. Press STOP to stop index searching.
Searching with the tape counter (go- to search)
You can mark a segment of the video cassette with the tape
counter that will help you easily locate the segment later.
1 Press MENU to display the menu.
2 Press 4 to choose Preferences.
3 Press 5 to display Go-To Search.
INDEX SEARCH
Press REW or FF
to begin searching
or
Enter a specific
Index number
- -
Press MENU to exit
AUDIOVOX Video Cassette Recorder User’s Guide
!
• If two recordings overlap, the
index mark for the second pro-
gram will be erased. Therefore,
when you use the index feature
to find the second program, the
VCR will skip over it .
• If you record multiple pro-
grams in one recording session,
the VCR will only find the index
mark that was placed on the
video cassette tape when the
recording session began.
!
Some index marks that may be
missed by the VCR :
• A mark too close to your loca-
tion on the tape.
• The mark at the beginning of a
recorded segment of five minutes
or less.
• The first index mark on the
tape when you start at the begin-
ning of the tape.
Go-To SEARCH
Current tape counter is
2:17:28
Press REW or FF
to go to - - : - - 00
Press MENU to exit
25
DV -K286N-SJ (AUDIOVOX) 98.5.4. 99.12.10 10:9 AM ˘ ` 25