Sony MDR-RF5000K - Manual (Page 14)

Connection
14 US
Connecting the Headphone System
Connecting the transmitter to analog
components
Connecting cable (supplied)
Use the supplied connecting cable (stereo mini-plug y pin plug × 2) when
connecting a stereo mini-jack (line out jack or headphone jack) to the LINE IN jacks.
In this case, set the volume on the player at a medium level. Noise can occur if the volume on the
player is set too low.
When connecting to a TV headphone jack, sound may not be heard from the TV speaker.
Connecting cables (sold separately)
Use the connecting cable (pin plug
× 2 y pin plug × 2) to connect the audio output jacks on a
VCR, TV, etc., to the LINE IN (L/R) jacks on the transmitter.
1 Connection
Connecting cable (supplied)
Audio right
(R, red)
To LINE IN jacks
Audio left
(L, white)
Stereo mini-plug
TV, portable device, etc.
Transmitter
Audio cord (sold separately)
Audio right (R, red)
To LINE IN jacks
Audio left
(L, white)
Transmitter
To audio output jacks
Audio left
(white)
Audio right (red)
VCR, TV, or other
component
Unimatch plug
adaptor (supplied)
to headphones jack
(stereo mini jack)
to headphones
jack (stereo
phone jack)