Sony PCV-W510G - Manual (Page 16)

To connect the modem cable
1. Unplug your telephone cable from the wall jack.
2. Insert the telephone cable into one of the RJ-11 jacks on a splitter device (optional).
3. Insert one end of the modem cable (supplied) into an RJ-11 jack on the splitter device.
4. Insert the plug end of the splitter device into the wall jack.
5. Plug the modem cable into the modem line jack on the computer.
To connect the m odem cable
Your computer has a protective sticker covering the Ethernet port located on the rear panel. Connect only
10BASE-T and 100BASE-TX cables to the Ethernet port. Using other cables or a telephone cable may result in an
electric current overload that can cause a malfunction, excessive heat, or fire in the port. For help on connecting to a
network, see your network administrator.
Page 16