Sony HCD-GS100 - Manual (Page 19)

Tape
19 US
Recording a CD by specifying
track order
— Program Edit
1
Load a recordable tape into the deck.
2
Program CD tracks following step 1 to 6
in “Programing CD tracks” on page 11.
3
Press CD SYNC on the remote.
Tape stands by for recording and CD pauses
for play.
4
Press REC z PAUSE/START (or X on
the remote).
Recording starts.
Note
After step 3, you cannot pause a CD even if you press
PAUSE X (or X on the remote).
Timer-recording radio
programs
You can record a preset radio station from a
specified time.
To timer-record, you must first preset the radio
station (see “Presetting radio stations” on
page 14) and set the clock (see “Setting the
clock” on page 8).
1
Tune in the preset radio station (see
“Listening to the radio” on page 16).
2
Press TIMER SET.
3
Press . or > repeatedly to select
“REC SET”, then press ENTER.
“ON” appears and the hour indication
flashes.
4
Set the time to start recording.
Press . or > repeatedly to set the
hour, then press ENTER.
The minute indication flashes.
Press . or > repeatedly to set the
minute, then press ENTER.
5
Set the time to stop recording following
the procedure in step 4.
The start time appears, followed by the stop
time, the preset radio station to be recorded
(e.g., “TUNER FM 5”), then the original
display appears.
6
Load a recordable tape into the deck.
7
Press ?/1 to turn off the system.
When the recording starts, the volume is
reduced to minimum.
continued