Sony SVS1313ZDZB - Manual (Page 207)

9. Hold the memory module by its edge and push in until it clicks into place as shown in
the illustration.
The latches on both sides of the slot snap into place to secure the module. Do not
touch any ICs (black components) on the memory module.
10. Install the battery pack.
[Details]
11. Replace the memory module compartment cover and secure it with the screws you
removed in step 3.
12. Connect all connection cables and peripherals that you removed in Step 1, and turn on
the computer.
13. Check that the amount of system memory has correctly changed.
[Details]
If the amount of indicated system memory is correct, memory module installation was
successful.
Related Topic
Notes on Adding and Removing Memory Modules
© 2013 Sony Corporation
207
Search