Sony PEG-T665C - Manual (Page 26)

26
Step 1: Charging your Sony CLIÉ Handheld
Note
Before you use your CLIÉ handheld for the first time, make sure to charge it.
Connect the supplied cradle to an AC power source in advance.
Charging will start as soon as you place your CLIÉ handheld on the
cradle. The battery icon in the screen changes to the battery charging
icon (
).
It takes about four hours for your CLIÉ handheld to be fully charged
for the first time. If your CLIÉ handheld is charged frequently,
subsequent charges will require less time.
When you place your CLIÉ handheld on the cradle, the cradle
indicator and the LED indicator (orange) of your CLIÉ handheld turn
on, and charging starts.
When charging is completed
The LED indicator (orange) of your CLIÉ handheld turns off. When
you remove your CLIÉ handheld from the cradle, the battery charging
icon changes to the battery icon (
).
As long as you place your CLIÉ handheld on the cradle, the cradle
indicator remains on even after charging is completed.
Note
If the battery in your CLIÉ handheld is fully discharged, all data stored on
the DRAM (memory) is lost. Performing another HotSync
®
operation once the
battery is recharged can restore information saved from the last HotSync
operation.
To the wall
outlet
Insert your CLIÉ handheld at an
angle to the cradle and lay it
back to fit into place.