Sony HDR-CX100 - Manual (Page 68)

8
Table of C
on
ten
ts
U
seful R
ec
or
ding
Techniques
Inde
x
GUIDEFRAME
You can display the frame and check that the subject is horizontal or vertical.
The frame is not recorded. Press DISP to make the frame disappear.
Steps
(HOME)

(SETTINGS)

[MOVIE SETTINGS]

[GUIDEFRAME]

a desired
setting
  
 OFF Does not display the guide frame.
ON Displays the guide frame.
Tips
Positioning the subject at the cross point of the guide frame makes a balanced composition.
REMAINING SET
Steps
(HOME)

(SETTINGS)

[MOVIE SETTINGS]

[ REMAINING SET]

a desired setting
  
 ON Always displays the remaining recording media indicator.
AUTO
Displays the remaining recording time of movies for about 8 seconds in
situations such as those described below.
When your camcorder recognizes the remaining recording media capacity
while the (Movie) lamp lights up
When you press DISP to switch the indicator from off to on while the
(Movie) lamp lights up
When you select the movie recording mode on the HOME MENU



Notes
When the remaining recordable time for movies is less than 5 minutes, the indicator stays on the screen.
CONVERSION LENS
When using a conversion lens (sold separately), use this function to record using the optimum
compensation for camera shake and focus for each lens.
Steps
(HOME)

(SETTINGS)

[MOVIE SETTINGS]

[CONVERSION LENS]

a desired setting
  



