Exposure comp, Help guide – Sony ILCE-7K User Manual
Page 192
Interchangeable Lens Digital Camera
ILCE-7/ILCE-7R
Exposure Comp.
You can adjust the exposure under MENU when the exposure compensation dial is set to “0.” Based on the
exposure value set by auto exposure, you can make the entire image brighter or darker if you adjust [Exposure
Comp.] to the plus side or minus side, respectively (exposure compensation). Normally, exposure is set
automatically (auto exposure).
1. MENU →
(Camera Settings) → [Exposure Comp.] → desired setting.
You can adjust the exposure in a range of –5.0EV to +5.0EV when the exposure compensation dial is set
to “0.”
Note
You can adjust the exposure in a range of –2.0 EV to +2.0 EV for movies.
If you shoot a subject in extremely bright or dark conditions, or when you use the flash, you may not be able
to get a satisfactory effect.
Only a value between –3.0 EV and +3.0 EV with the equivalent image brightness appears on the screen
when shooting. If you set an exposure beyond this range, the image brightness on the screen does not show
the effect, but it will be reflected in the recorded image.
When the exposure compensation dial is set to other than “0,” settings for the exposure compensation dial
will be prioritized. For example, if you set [Exposure Comp.] to +5.0EV, but the exposure compensation dial
is set to +2.0EV, the “+2.0EV” setting will be prioritized.
When you set the exposure compensation dial to “0” from a setting other than “0,” the exposure value
switches to “0” even if the exposure has been set to other settings.
When you use [Manual Exposure], you can compensate for the exposure only when [ISO] is set to [ISO
AUTO].
Related Topic
How to Use
183