Sony ILCE-7K - Manual (Page 382)

Interchangeable Lens Digital Camera
ILCE-7/ILCE-7R
Charging the battery pack
The supplied AC Adaptor is dedicated to this product. Do not connect with other electronic devices. Doing so
may cause a malfunction.
Make sure to use a genuine Sony AC Adaptor.
If the product's Charge lamp flashes while charging, remove the battery pack being charged, and then insert
the same battery pack firmly back into the product. If the Charge lamp flashes again, this may indicate a
faulty battery or that a battery pack other than the specified type has been inserted. Check that the battery
pack is the specified type.
If the battery pack is the specified type, remove the battery pack, replace it with a new or different one and
check that the newly inserted battery is charging correctly. If the newly inserted battery is charging correctly,
the previously inserted battery may be faulty.
If the Charge lamp flashes even if the AC Adaptor is connected to the product and the wall outlet (wall
socket), this indicates that charging has stopped temporarily and is on standby. Charging stops and enters
standby status automatically when the temperature is outside of the recommended operating temperature.
When the temperature returns to the appropriate range, charging resumes and the Charge lamp lights up
again. We recommend charging the battery pack in an ambient temperature of between 10°C to 30°C (50°F
to 86°F).
Even if the supplied AC Adaptor is used with the product when you shoot or play back images, power is not
supplied from the wall outlet (wall socket). If you use the AC Adaptor AC-PW20 (sold separately), you will be
able to shoot or play back images while power is supplied from the wall outlet (wall socket).
Notes on use
4-484-060-11(1)
Copyright 2013 Sony Corporation
Help Guide
How to Use
373
Find