Sony PCG-GRT270G - Manual (Page 69)

To set up the remote control
Insert two AA batteries (supplied) into the remote control as shown.
Inserting batteries into the rem ote control
Under normal use, the AA batteries may last up to six months. If your remote control does not operate properly, the
batteries may need to be replaced.
If your remote control is not being used for extended periods of time, remove the batteries to avoid possible damage from
battery leakage.
Connecting the infrared receiver
1. Connect the infrared receiver cable to a USB port located on either the front or back panel of your computer.
2. Place the infrared receiver unit in a position that enables it to communicate with your remote control.
The infrared receiver must be visible in a line-of-sight with your remote control in order to function properly.
Connecting the infrared receiv er (back panel)
Page 69