Inserting batteries, Help guide, How to use – Sony ICD-BX132 User Manual
Page 67: Troubleshooting list of topics, Icd-bx132
IC Recorder
ICD-BX132
Inserting batteries
1. Insert batteries.
Slide and lift the battery compartment lid, insert two LR03 (size AAA) alkaline
batteries (supplied) or two NH-AAA rechargeable batteries (not supplied) with
correct polarity, and close the lid.
Note
Do not use manganese batteries for this IC recorder.
When replacing the batteries, be sure to replace both batteries with new ones.
When you are not going to use the IC recorder for a long time, remove the batteries
to prevent damage from battery leakage and corrosion.
Hint
The battery indicator in the display window shows the battery condition.
: “LOW BATT” flashes. Replace the old batteries with new ones.
: “LOW BATT” flashes and the IC recorder will stop operation.
When replacing the batteries, files recorded or alarm settings are not erased even
when you remove the batteries.
You can use two NH-AAA-B2KN rechargeable batteries (not supplied).
Back Back to Top
4-448-103-11(1)
© 2013 Sony Corporation
61