Allied International GX1050C - Manual (Page 22)

GX1050 Technical Manual Page 22
GigE Sample Viewer and Filter Driver
o Download GigE Sample Viewer from www.alliedvisiontec.com . This will install the
Sample Viewer application program, drivers, and optionally the Prosilica Filter
Driver. The Filter Driver will improve CPU performance and is recommended.
o Plug in the GX camera Ethernet cable(s) and power. Verify that the Green LED is a
solid green. Run Sample Viewer. It will take a few seconds for the camera to be
recognized, especially if your camera is in DHCP mode. If the camera does not
appear after one minute, see the Trouble Shooting section of this document.
o In Sample Viewer, select the wrench icon to change camera settings. See the
Camera Controls Addendum for description of each setting. Select the eye icon to
stream images. If the camera is not imaging, see the Trouble Shooting section of
this document.
Figure 1. GigE Viewer application window.