Sony CDX-SW200 - Manual (Page 12)

12
Other Functions
Adjusting the balance and
fader
You can adjust the balance and fader.
1
Press (SEL) repeatedly until “BAL” or
“FAD” appears.
Each time you press (SEL), the item changes
as follows:
LOW * t MID * t HI * t
BAL (left-right) t FAD (front-rear)
* When EQ3 is activated (page 13).
2
Press the volume +/– button to adjust
the selected item.
Note
Adjust within 3 seconds after selecting the item.
Quickly attenuating the
sound
Press (ATT) .
“ATT” appears in the display.
To restore the previous volume level, press
(ATT) again.
Changing the sound and
display settings
The following items can be set:
• DEMO* — to turn the demonstration display
on or off.
– Select “ON” to activate the demonstration
display (The demonstration starts about 10
seconds after the unit is turned off).
– Select “OFF” to deactivate the demonstration
display.
• BEEP — to turn the beeps on or off.
Selecting the desired item
Press (SEL) and the desired preset
number button simultaneously.
(SEL) + (4) : DEMO *
(SEL) + (6) : BEEP
* When the unit is turned off.
To cancel the item, press (SEL) and the preset
number button simultaneously again.