Step 4: attach bracket b to the tv – Sony SU-W210 User Manual
Page 6
6
Step 4: Attach bracket B to the TV
Before attaching bracket B, remove the rear cover of the TV and disconnect all
the cables from the TV.
For how to remove the rear cover of the TV, refer to the Operating Instructions
supplied with the TV.
(The illustrations used in this manual show the KLV-21SR2/KLV-23M1 as
examples.)
1
Remove the screws as shown below, and remove the TV
stand from the TV.
To prevent damaging the surface of the LCD display, place the TV on a
soft mat.
Notes
• Place the TV body only on the table as shown above. If the TV stand is also on the
table, the TV body may be unstable and cause damage.
• When removing the TV stand, hold it firmly.
2
Secure bracket B to the TV firmly using the four screws
removed in step 1.
Rear of the TV
Bracket B
Rear of the TV
Soft mat
TV stand
Remove the four
screws.
Remove the six
screws. (M4 type for
bracket B)
Remove the two
screws and hinge
cover.
Rear of the TV
Soft mat
TV stand
KLV-21SR2
KLV-23M1
To secure bracket B to
the TV, use the screws
removed from the TV
stand, not the ones
from the hinge cover.