Sony VPL-VW40 - Manual (Page 28)

28
Tip
When “Auto Input Search” is set to “On” in the Function
menu, the input terminal with effective
signals is automatically displayed by pressing INPUT.
1
Press the ? / 1 (ON/STANDBY) switch.
A message “POWER OFF?” appears on the screen.
2
Press the ? / 1 (ON/STANDBY) switch again before the message
disappears.
The ON/STANDBY indicator flashes in green and the fan continues to run to reduce the
internal heat. First, the ON/STANDBY indicator flashes quickly, during which you will
not be able to light up the ON/STANDBY indicator with the
? / 1 (ON/STANDBY) switch.
3
Confirm that the fan stops running and the ON/STANDBY indicator lights
in red.
You can turn off the projector by holding the ? / 1 (ON/STANDBY) switch for about one
second, instead of performing the above steps.
Turning Off the Power