Acesonic AM-825 - Manual (Page 7)

AC INPUT AC INPUT
~230/115V 50/60Hz ~230/115V 50/60Hz
FUSE 250V/T10A FUSE 250V/T10A
GND
LINE MIC
OUTPUT
MIXING
HIGH
SUB
MUSIC
LOW
PRE
REC INPUT
R
L
OUTPUT
PC INPUT PC INPUT
VIDEO
SPEAKER SYSTEM SPEAKER SYSTEM
BGM
INPUT
INPUT
DVD
VOLTAGE SELECT VOLTAGE SELECT
+ - RIGHT
Cb
COMPONENT OUTPUT COMPONENT OUTPUT
LEFT
Y Cb Cr
Y Cr INPUT/OUTPUT
PC USB PC USB
BGM
BGM
VIDEO
INPUT
AUDIO
INPUT
L
R
S.VIDEO
INPUT
AUX AUDIO OUT AUDIO OUT
DVD VIDEO OUT VIDEO OUT
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTORE DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTORE
RISK OF ELECTRIC RISK OF ELECTRIC
SHOCK DO NOT OPEN SHOCK DO NOT OPEN
CAUTION
UNLOCK
LOCK
115V
S.VIDEO
+ -
RIGHT LEFT
UNLOCK
LOCK
B B
A A
MIXING AMPLIFIER
MODEL:AM-825 INPUT:AC115V/230V
S/N
CITYOF INDUSTRY,CA,USA
acesonic.com AUX
DVD
DO NOT REMOVE LOOP
cesonic
1
2
3
4 5 6 7 8 9
13 12 11 10 15 14 16 17
Rear Panel Function and Operation
1.AC 115/230V SELECT -
2.AC inlet -
3.Fuse -
4.SPEAKER SYSTEM
5.MIC OUTPUT jacks -
6.SUBWOOFER OUTPUT jacks
7.LINE OUTPUT jacks -
8.REC OUTPUT jacks -
9.EQ L/R INPUT and OUTPUT jacks -
10.AUDIO/VIDEO OUTPUT jacks
R -
L -
VIDEO -
S-VIDEO -
11,12,13.AUDIO/VIDEO INPUT jacks (BGM,AUX and DVD) -
R -
L -
VIDEO -
S-VIDEO-
14.PC VIDEO INPUT-
15.PC USB CONNECTION -
16.COMPONENT VIDEO OUTPUT jacks -
17.COMPONENT VIDOE INPUT jacks(from BGM and DVD input) -
,
.
-
Voltage selection switch. Push the switch right for 115V, and left for
230V. (Note: different regions of the world use different voltage strengths. Please check to make
sure the correct voltage is selected for your area.)
Male inlet for power cable.
Replaceable 250V/T10A fuse to protect the machine.
- One set of Speakon connector ports on the top one set of banana
connector ports on the bottom These two types both provide audio output to stereo
external speakers. Banana connector ports designed to be used with bare speaker wire as well
as banana connectors. The LEFT and RIGHT outputs each consist of a positive (+, red) and
negative (-, black) signal that correspond with the inputs on each speaker. (Please see
connection diagram on page 10 for proper configuration)
Outputs the microphone signal. High and low ports provide different
thresholds of the signal.
- Music port transfers the music-only signal; Mixing port
transfer both music and vocal signal to the sub woofer.
Extract the audio signal to another sound device.
Extract the audio signal to sound recording device.
For external equalizer connection. Utilize to send and
return AM-825 input signal to and from an external equalizer for further signal processing.
(Please see page 10 for proper configuration)
A set of AUDIO LEFT, AUDIO RIGHT, VIDEO, and S-VIDEO
outputs:
AUDIO RIGHT RCA output. Connect to the audio right input on an external component.
AUDIO LEFT RCA output. Connect to the audio left input on an external component.
VIDEO RCA output. Connect to the video input on an external component.
S-VIDEO (Y/C) output. Connect to the S-VIDEO input on an external component.
Each columm consists of a
complete set of AUDIO LEFT, AUDIO RIGHT, VIDEO, and S-VIDEO.
AUDIO RIGHT RCA input. Connect to the audio right output from an external component.
AUDIO LEFT RCA input. Connect to the audio left output from an external component.
VIDEO RCA input. Connect to the video output from an external component.
S-VIDEO (Y/C) input. Connect to an S-VIDEO output from an external component.
additional VIDEO RCA and S-Video input from computer-based devices.
USB connection used to interface with computer-based devices.
*Note- please install the driver before connecting to a computer. Otherwise your computer
might not to able to recognize the mixing amplifier(Please see page 13 for more detail).
RED, GREEN, BLUE component video RCA
outputs. Connect to the red, green and blue component video inputs, respectively, on an
external component.
RED, GREEN, BLUE
component video RCA inputs. Connect to the red, green and blue component video outputs,
respectively, from an external component.
Do
not take off loop if not using these jacks
7