Sony DCR-VX1000 User Manual
Page 19
19
Advanced Operations
WARNING
AC power cord must only be changed at qualified service shop.
Precautions
• The set is not disconnected from the AC power source as long as it is connected to the wall outlet,
even if the set itself has been turned off.
• To prevent accident from a short circuit, do not come into contact with the terminal inside the
shutter at the rear of the camcorder.
Notes on the POWER lamp
• The POWER lamp will remain lit for a while even if the unit is unplugged after use. This is normal.
• If the POWER lamp does not light, disconnect the AC power cord. After about one minute, try again.
Using a Car Battery
Use the DC-V515/V700 pack (not supplied). Connect the cord of the DC pack to the cigarette lighter
socket of a car (12 V or 24 V). Connect the DC pack in the same way as the AC power adaptor.
Use the connecting cord supplied with this camcorder.