Speakers, Cd player, Tape deck – Sony MHC-RG4SR User Manual

Page 23: Tuner

Advertising
background image

23

Additional Information

Speakers

Sound comes from one channel or unbalanced
left and right volume.

• Check the speaker connection and speaker

placement.

Sound lacks bass.

• Check that the speaker’s + and – jacks are

connected correctly.

CD Player

The CD tray does not close.

• The CD is not placed properly.

The CD will not play.

• The CD is not lying flat in the disc tray.

• The CD is dirty.

• The CD is loaded label side down.

• There is moisture on the CD.

Play does not start from the first track.

• The player is in program or shuffle mode. Press

PLAY MODE repeatedly until “PGM” or
“SHUF” disappears.

Tape Deck

The tape does not record.

• No tape in the cassette holder.

• The tab has been removed from the cassette (see

“To save a tape permanently” on page 21).

• The tape has reeled to the end.

The tape does not record nor play or there is a
decrease in sound level.

• The heads are dirty (see “Cleaning the tape

heads” on page 21).

• The record/playback heads are magnetized (see

“Demagnetizing the tape heads” on page 21).

The tape does not erase completely.

• The record/playback heads are magnetized (see

“Demagnetizing the tape heads” on page 21).

There is excessive wow or flutter, or the sound
drops out.

• The capstans or pinch rollers are dirty (see

“Cleaning the tape heads” on page 21).

Noise increases or the high frequencies are
erased.

• The record/playback heads are magnetized (see

“Demagnetizing the tape heads” on page 21).

Tuner

There is severe hum or noise (“TUNED” or
“STEREO” flashes in the display).

• Adjust the antenna.

• The signal strength is too weak. Connect the

external antenna.

A stereo FM program cannot be received in
stereo.

• Press STEREO/MONO repeatedly until

“MONO” disappears.

If other troubles not described above

occur, reset the system as follows:

1

Unplug the power cord.

2

Plug the power cord back in.

3

Press

x

, DISPLAY, and

?/1

at the same

time.

4

Press

?/1

to turn on the system.

The system is reset to the factory settings. All
the settings you made are cleared.

Advertising
This manual is related to the following products: