Sony SDM-P234 - Manual (Page 5)

5
(US)
US
Self-diagnosis function
This monitor is equipped with a self-diagnosis function. If there is
a problem with your monitor or computer(s), the screen will go
blank and 1 (power) will light up in green.
If the function tells you the monitor may have a potential failure,
consult your authorized Sony dealer.
If the picture disappears from the screen and
1 (power) is green
1
Turn the monitor off by touching 1 (power) and
disconnect the video signal cables from the
monitor.
2
Turn the monitor on by touching 1 (power).
If all four color bars appear (white, red, green, blue), the monitor
is working properly. Reconnect the video signal cables and check
the condition of your computer(s).
If the color bars do not appear, there is a potential monitor failure.
Displaying this monitor’s
information
While the monitor is receiving a video signal, touch and
hold MENU for more than 5 seconds until the
information box appears.
Touch MENU again to make the box disappear.
If any problem persists, call your authorized Sony dealer and give
the following information:
• Model name: SDM-P234
• Serial number
• Detailed description of the problem
• Date of purchase
• Name and specifications of your computer and graphics board
• Type of input signals (analog RGB/digital RGB)
Specifications
LCD panel
Panel type: a-Si TFT Active Matrix
Picture size:
23 inch (58.4 cm)
Input signal format
RGB operating frequency*
Horizontal
× Vertical:
28–92 kHz
× 48–85 Hz (analog RGB)
28–75 kHz
× 60 Hz (digital RGB)
Resolution
Horizontal
× Vertical:
Max. 1920 dots
× 1200 lines
1600 –1920
dots × 1200 lines
(Only when the vertical frequency is set to 60 Hz.)
Input signal levels
Analog RGB video signal
0.7 Vp-p, 75
Ω , positive
SYNC signal
TTL level, 2.2 k
Ω , positive or negative
(Separate horizontal and vertical, or composite sync)
0.3 Vp-p, 75
Ω , negative (Sync on green)
Digital RGB (DVI) signal: TMDS (Single link)
Audio input
Stereo minijack, 0.5 Vrms
Audio output
Stereo minijack
Power requirements
100–240 V, 50–60 Hz, Max. 1.0 A
Power consumption
Max. 80 W
Operating temperature
5–35 ° C
Dimensions (width/height/depth)
Display (upright):
Approx. 534
Ч 429 Ч 250 mm (with stand)
(21
1
/ 8
Ч 17 Ч 9 7
/ 8 inches)
Approx. 534
Ч 352 Ч 110.5 mm (without stand)
(21
1
/ 8
Ч 13 7
/ 8
Ч 4 inches)
Mass
Approx. 9.7 kg (21 lb 6 oz) (with stand)
Approx. 7.5 kg (16 lb 9 oz) (without stand)
Plug & Play
DDC2B
Accessories
See “Setup.”
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µs, whichever is larger.
• Horizontal blanking width should be more than 2.5 µsec.
• Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without notice.
MENU
Example
Model name
Serial number
INFORMATION
MODEL : SDM-P234
SER. NO : 1234567
MANUFACTURED : 2004-40
Week and
year of
manufacture