Sony MDS-JE440 - Manual (Page 25)

25
masterpage:Right filename[\\Win-35\logitecmo\422958711MDSJE640CED\01GB03OPE-CED.fm]
Playing a specific track/Locating a particular point in a track
Pla
y
ing
M
D
s
model name1[MDS-JE640] model name2[MDS-JE440]
[4-229-587-11(1)]
2 Enter the corresponding digits.
To enter 0, press 10/0 instead.
Examples:
• To play track number 30, press >10, then 3 and 10/0.
• To play track number 108, press >10, then 1, 10/0,
and 8.
z
If you enter a track number while the deck is paused
The deck will still be paused at the beginning of the track.
Locating a particular point
in a track
You can locate a particular point in a track during play or
play pause.
During play, press down m / M until you reach the
point you want.
You will hear intermittent playing as the disc goes forward
or in reverse. When you reach the point you want, release
the button.
Notes
• If the MD reaches the end while you’re pressing M, the deck
stops.
• Tracks that are only a few seconds long may be too short for
monitoring. For such tracks, play the MD at normal speed.
During play pause, press down m / M until you reach
the point you want.
When you reach the point you want, release the button. To
start playing, press
H or X. No sound is output during
this time.
z
When “– Over –” appears in the display
The MD has reached the end while you’re pressing
M. Turn
AMS counterclockwise (or press .) or press m to go back.
Locating a point while monitoring the
sound
Locating a point by observing the time
indication
AMS
m/M