Sony PCG-R505ES User Manual
Page 40
VAIO® Computer User Guide
40
8
Click Enable Data Security if the access point was set up with an encryption
key, and select either alphanumeric characters or hexadecimal, depending on
your encryption key.
9
Type your key in the first box, and make sure “Key 1” is selected near the
bottom of the screen.
10 Click Next.
11 Select a power management option, and click Next.
12 Click the check box next to “Renew IP Address when selecting this profile”
to select it, and then click Finish.
Communicating without an Access Point (peer-to-peer)
A peer-to-peer network is one in which a local network is created only by the
wireless devices themselves, with no other central controller or Access Point.
Each device communicates directly with other devices in the network. You can
set up a peer-to-peer network easily at home.
To communicate without an Access Point
1
Open the computer and move the Wireless LAN switch on the right to ON.
The Wireless LAN indicator to the left of the switch lights up.
2
Click Start, and point to Settings.
3
Point to Control Panel, and select Wireless Network. The Add/Edit
Configuration Profile window opens.
4
Click Add. The Edit Configuration window opens.
5
Type a profile name, and use the drop-down menu to select Peer-to-Peer
Group under Network Type.
6
Click Next.
7
Create a network name, and use the drop-down menu to select a channel
number.
8
Click Next.