Sony SLV-777HF - Manual (Page 62)

Basic Operations 62
2
Set the date, start and stop times, channel
number, and tape speed:
1 Press / to flash each item in turn.
2 Press >/. to set each item.
To correct a setting, press ? to return to
that setting and reset.
To record the same program every day or the same day every week,
press . while the date is flashing. For details, see “Daily/weekly
recording” on this page.
To record from a source connected to the LINE 1 IN or LINE 2 IN
jacks, press INPUT SELECT to display “L1” or “L2” in the “CH”
position.
3
Press / to confirm the setting.
The cursor (z) appears at the beginning of the line. To enter another
setting, move the cursor to the next line and repeat step 2.
4
Press OK.
5
Press POWER to turn off the VCR.
The indicator appears in the display window and the VCR
stands by for recording. When using a cable box, leave it on.
Daily/weekly recording
In step 2 above, press . to select the recording pattern. Each time you press
., the indication changes as shown below. Press > to change the indication
in reverse order.
the current date n SU-SA n MO-SA n MO-FR n EVERY SA n ..... n
EVERY MO n EVERY SU n 1 month later n (dates count down) n the
current date
Tips
• To set the channel, you can also use the CH+/– , number buttons, or shuttle ring
during stop.
• To set the tape speed, you can also use SP/EP.
Note
• If you are using cable box control, you cannot select “L1” or “L2”.
Setting the timer manually (continued)
OK
PLAY
OK
PLAY
OK
PLAY
• POWER
TIMER SET / CHECK MO 1 1 / 1 6
DATE
– / – – – : – – – : – – – –
– / – – – : – – – : – – – –
– / – – – : – – – : – – – –
– / – – – : – – – : – – – –
START STOP CH
11 / 1 6 – : – – – : – – – –
– / – – – : – – – : – – – –
– / – – – : – – – : – – – –
– / – – – : – – – : – – – –
MO EP