Battery pack and power – Sony DSC-R1 User Manual

Page 108

Advertising
background image

108

You cannot charge the battery pack.

A battery pack cannot be charged while the camera is turned on. Turn the camera off (

t

step

2 in “Read This First”).

The battery pack cannot be installed.

As you insert the battery pack, use the tip of the battery pack to push the battery eject lever
toward the front of the camera (

t

step 1 in “Read This First”).

Install the battery pack correctly (

t

step 1 in “Read This First”).

The /Charge lamp flashes when charging a battery pack.

Install the battery pack correctly (

t

step 1 in “Read This First”).

The battery pack is discharged. Disconnect the AC Adaptor and reconnect it, then charge the
battery pack.

The battery pack has malfunctioned. Consult your Sony dealer or local authorized Sony
service facility.

The /Charge lamp does not light up when charging a battery pack.

Properly connect the AC Adaptor.

Install the battery pack correctly (

t

step 1 in “Read This First”).

The battery pack is fully charged.

The battery pack is discharged. Disconnect the AC Adaptor and reconnect it, then charge the
battery pack.

The AC Adaptor has malfunctioned. Consult your Sony dealer or local authorized Sony
service facility.

The battery remaining indicator is incorrect, or sufficient battery remaining
indicator is displayed but the power runs out too quickly.

This phenomenon occurs when you use the camera in an extremely hot or cold location
(page 125).

The displayed time remaining differs from the current one. Fully discharge and then charge
the battery pack to correct the display.

The battery pack is discharged. Install the charged battery pack (

t

step 1 in “Read This

First”).

The battery pack is dead (page 125). Replace it with new one.

The battery pack runs down too quickly.

Charge it sufficiently (

t

step 1 in “Read This First”).

You are using the camera in an extremely cold location (page 125).

The battery terminal is dirty. Clean the battery terminal with a cotton swab, etc., and charge
the battery pack.

The battery pack is dead (page 125). Replace it with new one.

Disconnect the DC plug from the camera when charging is complete.

Battery pack and power

Advertising