Setting the aux+ setup mode, Setting the aux name mode (cde-9874 only), Ipod® (optional) – Alpine CDE-9872 User Manual

Page 19: Cde-9874 only), Ipod, Optional)

Advertising
background image

17

-EN

No sound is produced by the system when the power output is set to

OFF.

Setting the AUX+ SETUP Mode

An external device (such as a portable music player) can be connected
to the iPod Direct connector of this unit. An iPod Direct/RCA Interface
cable (optional) is required.

A portable music device and an iPod cannot be connected to the iPod
Direct connector at the same time.

Setting the AUX NAME mode (CDE-9874 only)

You can change the AUX NAME display in the SETUP mode.

*

1

After the setting is completed, AUX is displayed on the unit.

*

2

After the setting is completed, PMD is displayed on the unit.

CDE-9874

CDE-9872

An iPod

®

can be connected to this unit by using the proprietary

ALPINE FULL SPEED

Connection Cable (KCE-422i) (sold

separately). When this unit is connected by using the cable, the controls
on the iPod are not functional.

Set AUX+ SETUP to OFF when an iPod is connected (refer to

“Setting the AUX+ SETUP Mode” on page 17).

If the Bluetooth Box and an iPod are connected at the same time, be

sure to disconnect the iPod from the Bluetooth Box while turning
ACC to OFF (CDE-9874 only).

iPods usable with this unit

• The unit can be used with the fourth generation and above

iPod, iPod photo, iPod minis or iPod nano. iPod Shuffle
cannot be used, however.

• Touch wheel or scroll wheel type iPods without the dock

connector cannot be connected to the unit.

• The unit can be used with the following iPod.

Fourth generation iPod
Fifth generation iPod
iPod photo
iPod mini
First generation iPod nano
Second generation iPod nano

If the unit is used with iPod software versions of iTunes earlier than

7.1.0.59, correct function and performance are not guaranteed.

CDE-9872:

POW ON :

The speakers are driven by the built-in
amplifier.

AUX+ ON / AUX+ OFF (Initial setting)

AUX+ ON:

Set to ON when a portable device is connected. If
SOURCE/

is pressed and AUX+ is selected, the

sound of the portable device is input to the unit.

AUX+ OFF: Set to OFF when an iPod is connected.

AUXILIARY*

1

(Initial setting) / TV / DVD / PORTABLE*

2

/ GAME

Amplifier

Front

left

Front

right

Speakers

SPEAKER

RIGHT FRONT

Front

right

SPEAKER
RIGHT REAR

Rear

right

SPEAKER
LEFT REAR

Rear

left

SPEAKER
LEFT FRONT

Front

left

iPod

®

(Optional)

VIEW

SOURCE/

/

/

ENT

Rotary encoder

/MUTE

/ESC

Preset buttons
(1 through 6)

4 5

6

2

1

VIEW

SOURCE/

/

/

ENT

/

AUDIO

/ESC

Preset buttons
(1 through 6)

4 5

6

2

1

Advertising
This manual is related to the following products: