Connecting to a power source, Using the dry battery – Sony D-NE500 User Manual

Page 28

Advertising
background image

28

B

Connecting to a power source

Using the dry battery

Use only the following dry battery type for
your CD player:
• LR6 (size AA) alkaline battery

For the battery life, see “Specifications.”

Note

Be sure to remove the AC power adaptor when
using the dry battery.

1

Squeeze OPEN from both sides to
open the lid of your CD player,
then open the battery
compartment lid inside the player.

2

Insert the LR6 (size AA) alkaline
battery (not supplied) by matching
the

3

to the diagram in the battery

compartment and close the lid
until it clicks into place.

Insert the # end first.

When to replace the battery

You can check the remaining power of the
battery in the display.

t

t

t

t

t Lobatt*

* Beep sounds.

When the battery is depleted, replace the dry
battery with new one.

Notes

• The indicator sections of

roughly show the

remaining battery power. One section does not
always indicate one-fourth of the battery power.

• Depending on operating conditions, the indicator

sections of

may increase or decrease.

To remove the battery

Remove the battery as illustrated below.

To attach the battery compartment lid

If the battery compartment lid is detached by
an accidental drop, excessive force, etc.,
attach it as illustrated below.

Advertising