Sony PCG-GRX770 User Manual
Page 33
3.
Type the name of the network (access point) you want to connect to in the Network name (SSID) box. (The
name should be no more than 32 ASCII characters.)
The following steps are for networks that require a network key. If you do not know the network key or are not
sure a network key is required, see the network administrator for more information.
4.
Click to select the Data encryption (WEP enabled) check box.
5.
Click to select the Network Authentication (Shared mode) check box.
6.
Click to cancel the The key is provided for me automatically check box.
7.
Type the network key in the Network key box. (The key should be between 5 and 13 ASCII characters or 10 to
26 hexadecimal characters.)
8.
Retype the network key in the Confirm network key box.
9.
Click OK. The network name appears in the Preferred networks list box.
To set up a computer-to-computer (ad-hoc) network
1.
Insert a Wireless LAN PC Card into the PC Card slot. See
for more information.
Inserting a PC Card
2.
Click Start, Control Panel, Network and Internet Connections, and Network Connections. The Network
Connections window appears.
3.
Right-click Wireless Network Connection, and select Properties. The Wireless Network Connection Properties
dialog box appears.
4.
On the General tab, click to select Show icon in notification area when connected.
Page 33