Sony PCV-MXS10 - Manual (Page 31)

To Set Up Additional Equipment
31
To connect to your computer with the video cable (supplied) and video cable
adapter (supplied)
Connect a standard video cable (supplied) to the jack-end of the video cable
adapter (supplied). Connect the S-video connector end into the S-video port on
the back panel of your computer.
Connecting a TV monitor (display)
1 Connect the video connector end of the video cable adapter (supplied) to the
Video-Out connection on the back panel of your computer.
2 Connect the jack end of the video cable adapter to either end of the video
cable (supplied). Connect the other end of the video cable to the Video-In
jack on your TV monitor or display. (The Video-In may be located on the
side or rear of your TV monitor/display.)
To use the video cable adapter (2 supplied)
✍
Your VAIO MX Computer is supplied with certain audio and video cables. Depending
on your in-home cable access, you may require extra cables, adapters or connection
equipment not supplied with your computer.
Video cable adapter
Video cable
(supplied)
Connect to device
Connect to Video/S-video ports
(supplied)
SERIAL
LINE
IN
LINE
OUT
MONITOR DVI
R L
SPEAKER ------ VIDEO OUTPUT ------ VHF/UHF ------ VIDEO 1 INPUT ------ S VIDEO/VIDEO S VIDEO/VIDEO AUDIO AUDIO
Video/S-video Out
(port)
Video/S-video In
(port)