Sony HT-CT260H User Manual
Page 31
31
US
Ad
dit
ional
Inf
ormati
on
OTHERS
The remote control does not
function.
Point the remote control at the
remote control sensor
on the
system.
Remove any obstacles in the path
between the remote control and the
system.
Replace the battery in the remote
control with new one, if it is weak.
Make sure you select the correct
input on the remote control.
The Control for HDMI function does
not work properly.
Check the HDMI connection
Set up the Control for HDMI function
on the TV.
Check the Control for HDMI settings
on the connected equipment. Refer
to the operating instructions
supplied with the connected
equipment.
If you connect/disconnect the AC
power cord (mains lead), wait for
more than 15 seconds and operate
the system.
“PROTECT” appears on the front
panel display.
Press to turn off the system.
After “STBY” disappears, disconnect
the AC power cord (mains lead),
then check that nothing is blocking
the ventilation holes of the system.
RESET
If the system still does not operate
properly, reset the system as follows:
1
Press to turn on the Sound
Bar.
2
Press while pressing INPUT
and VOL on the Sound Bar.
“RESET” appears and the system is
reset. AMP menu, sound field, etc.,
return to the default settings.