Turning off the power – Sony VPL-HW40ES User Manual
Page 18
18
1
Press the
?
/
1
(ON/STANDBY)
switch.
A message “POWER OFF?” appears on
the screen.
2
Press the
?
/
1
(ON/STANDBY)
switch again before the
message disappears.
The ON/STANDBY indicator flashes in
green and the fan continues to run to
reduce the internal heat. First, the ON/
STANDBY indicator flashes quickly,
during which you will not be able to
light up the lamp with the ?/1 (ON/
STANDBY) switch.
The fan stops and the ON/STANDBY
indicator changes from flashing green to
remaining red.
The power is turned off completely, and
you can disconnect the power cord.
Never disconnect the power cord while the
indicator is flashing.
You can turn off the projector by holding the
?/1 (ON/STANDBY) switch for about 1
second, instead of performing the above
steps.
Turning Off the Power
Note