Dpof: adding a print order mark, Print: printing images using a printer, Adding a print order mark – Sony DSC-W200 User Manual
Page 58: Print): printing images using a printer
58
Viewing menu
For details on the operation 1 page 38
5
Press MENU.
6
Select [OK] with v, then press z.
In index mode:
3
Select the image you want to protect with v/V/b/B on the control button, then press z.
is attached to the selected image.
4
To protect other images, repeat step 3.
5
To select all the images in a folder, select the folder selection bar with b, then press z.
is attached to the selected folder.
6
Press MENU.
7
Select [OK] with v, then press z.
(Protect) indicator appears on the selected images.
To cancel the protection
Select the image for which you want to cancel protection, and unlock it by performing the
same procedure to protect it.
(Protect) indicator disappears.
•
Note that the formatting erases all the data stored on the recording media, even if the images
are protected, and these images cannot be restored.
•
It may take some time to protect an image.
Adds
(Print order) mark to images you want to print.
See page 98.
This item has same function as [
Print] on the HOME screen.
: Adding a Print order mark
(This Image)
Attaches/clears the DPOF-based print marks to (from) the image
that is now selected.
(Multiple Images)
Selects images and attaches/clears the DPOF-based print marks to
(from) the images.
(Print): Printing images using a printer