Flash level: adjusting the amount of flash light – Sony DSC-H50 User Manual

Page 71

Advertising
background image

71

Us
ing
the s

h

ooti

ng fun

ct

ions

Shooting menu

For details on the operation 1 page 60

• If the

indicator flashes while shooting, the white balance is either not set or cannot be set. Use

automatic white balance.

• Do not shake or strike the camera while [One Push Set] is in progress.
• When flash mode is set to (Flash forced on) or

(Slow synchro), the white balance is adjusted to the

condition with the flash emitting.

• When [Color Filter] is set to other than [Off], the basic white color cannot be captured.

Adjusts the amount of flash light.

• The flash level can be set in 1/3 EV increments.
• The value is not displayed on the screen. It is indicated as

or

.

• To change flash mode, see page 31.
• If the subject is too bright or dark, this adjustment may have no effect.

The flash strobes two or more times before
shooting to reduce the red-eye phenomenon when
using the flash.

• To avoid blurring of images, hold the camera firmly until the shutter is released. It usually takes a second

after you press the shutter button. Be also sure not to allow the subject to move during this period.

• Red-eye reduction may not produce the desired effects. It depends on individual differences and

conditions, such as distance to the subject, or if the subject looked away from the pre-strobe. In such a
case, you can correct the red-eye using [Retouch] in the viewing menu after shooting (page 81).

• When the Face Detection function is not used, the flash will not strobe to reduce red-eye phenomenon

even when [Auto] is selected.

Flash Level: Adjusting the amount of flash light

M

+2.0EV

Toward +: Makes the flash level higher.

0EV

The amount of flash light that the camera adjusts
automatically.

m

–2.0EV

Toward –: Makes the flash level lower.

Red Eye Reduction: Setting the Red Eye Reduction function

(Auto)

When the Face Detection function is activated, the flash
strobes automatically to reduce the red-eye phenomenon.

(On)

The flash always strobes to reduce the red-eye phenomenon.

(Off)

Does not use Red Eye Reduction.

Advertising