Sony WX-4500X - Manual (Page 17)

17
Tuning in a station through a
list
— List-up
1
During radio reception, push the jog
roller.
The frequency or the name assigned to the
station currently tuned in flashes.
2
Rotate the jog roller until you find the
desired station.
If no name is assigned to the selected station,
the frequency appears in the display.
3
Push the jog roller to tune in the
desired station.
Note
If you do not perform any operation for more than 5
seconds with the list displayed, the display returns to
normal radio reception mode.
Operating with the card remote
commander
1
During radio reception, press (LIST) .
2
Press (DISC/PRESET -) or
(DISC/PRESET +) repeatedly until you
find the desired station.
3
Press (ENTER) .
Other Functions
You can also control the unit (and optional CD/
MD units) with a rotary commander
(optional) .
Using the rotary commander
First, attach the appropriate label depending on
how you want to mount the rotary commander.
The rotary commander works by pressing
buttons and/or rotating controls.
By pressing buttons
Press To
(SOURCE)
Change source (radio/CD/
MD*
1 /Tape)/Power on
(MODE)
Change operation
(radio band/CD unit*
1 /MD
unit* 1 /tape playback
direction)
(ATT) Attenuate sound
(OFF)* 2
Stop playback or radio
reception/Power off
(SOUND) Adjust the sound menu
(DSPL) Change the display item
continue to next page t
SOUND
DSPL
MODE
SOUND
DSPL
MODE
OFF
Rotate the VOL control
to adjust the volume.
(SOURCE)
(SOUND)
(ATT)
(MODE)
(DSPL)
(OFF)