Sony NAS-CZ1 - Manual (Page 4)

Registering the system
When the system is connected to your computer after installing the M-crew Server, the system is registered automatically on your computer. If you make the
higher security, you can register it manually.
Click [Start] - [All Program s ] - [M -cre w Se rve r] - [TOOLS] - [EQUIPM ENT LIST] in that orde r.
The "M-crew Server EQUIPMENT LIST" dialog box appears.
Pe rform ing s e tup in autom atic m ode
1. Set "Equipment selection mode:" to "Automatic".
2. Turn on the system.
3. Access M-crew Server.
This completes the equipment registration.
Pe rform ing s e tup in m anual m ode
To increase the security level, register the system by the follow ing method.
4. Set "Equipment selection mode:" to "Manual".
5. Turn on the system.
6. Set the system to registration mode. Refer to the manual for the system.
7. Click the [Add] button. This completes the equipment registration.
The registration starts.
"Complete!" appears in the display of the system w hen the registration is complete.
Re m oving re gis te re d e quipm e nt
Select the equipment to remove and click the [Remove] button. You can remove equipment in either manual or automatic mode.
Note
When you add or remove equipment in Window s XP SP2, the "Window s Security Alert" dialog box w ill appear. Check the ICF Settings .
Page 4