Sony RDH-GTK37iP - Manual (Page 9)

9 GB
Remote control RM-AMU166
1 "/1 (on/standby)
Turn on the system, or set it to
standby mode.
B LED SPEAKER (page 22)
Change the light illumination.
C VERTICAL SOUND indicator
Lights up when vertical sound effect
is turned on.
D BLUETOOTH indicator
(page 16)
Show the Bluetooth status of the
system.
E BLUETOOTH (page 16, 18)
Press to select Bluetooth function.
Hold down to activate Bluetooth
pairing during Bluetooth function.
F VERTICAL SOUND (page 22)
Select the vertical sound effect.
G FLANGER, ISOLATOR
(page 21)
Select the DJ EFFECT type.
H Unit: VOLUME/
DJ CONTROL +/–
Adjust the volume.
Adjust the DJ EFFECT level
(page 21).
You cannot use this knob to adjust the
volume when the DJ EFFECT is
activated.
Remote control: VOLUME +*/–
Adjust the volume.
I BASS BAZUCA (page 21)
Select the BASS BAZUCA effect.
J EQ (page 21)
Select the preset sound effect.
K
(USB) port (page 13, 14, 15)
Connect an optional iPod/iPhone or
USB device.
L Terminal for Apple Device
(page 12, 14)
M Holding arm (page 12)
N PUSH button (page 12)
O m/M (rewind/fast forward)
Hold down to find a point in a track or
file during playback.
Unit: l/L (go back/go
forward)
Remote control: ./> (go
back/go forward)
Select a track or file.
Unit: TUNING +/–
Remote control: +/– (tuning)
Tune to the station you want.