Sony HDR-HC3 - Manual (Page 98)

98
E:\SONY\2661355111\01US09TBS.fm
HDR-HC3
2-661-355-11(1)
[DIGITAL ZOOM] does not function.
• [DIGITAL ZOOM] does not function when you set [TELE MACRO] to [ON].
Tiny spots in white, red, blue, or green appear on the screen.
• The spots appear when you are recording in [SLOW SHUTTR], [SUPER NS], or [COLOR
SLOW S]. This is not a malfunction.
The subjects passing by the frame might appear crooked.
• This is called the focal plane phenomenon. This is not a malfunction. Because of the way the
image device (CMOS sensor) reads out image signals, the subjects passing by the frame
rapidly might appear crooked depending on the recording conditions.
The color of the picture is not correctly displayed.
• Deactivate the NightShot function (p. 33).
The screen picture is bright, and the subject does not appear on the screen.
• Cancel the BACK LIGHT function (p. 33).
• Set the NIGHTSHOT switch (p. 33) to OFF.
The screen picture is dark, and the subject does not appear on the screen.
• Press and hold DISP/BATT INFO for a few seconds to turn on the backlight (p. 20).
The picture appears too bright, or flickering or changes in color occurs.
• This occurs when recording pictures under a fluorescent lamp, sodium lamp, or mercury
lamp. Cancel [PROGRAM AE] to minimize this phenomena (p. 52).
Black bands appear when you record a TV screen or computer screen.
• Set [STEADYSHOT] to [OFF] (p. 57).
If you are playing back pictures stored on a “Memory Stick Duo,” refer also to the “Memory
Stick Duo” section (p. 95).
You cannot play back tape.
• Slide the POWER switch to turn on the PLAY/EDIT lamp.
• Rewind the tape (p. 31).
You cannot play back in reverse direction.
• Reverse playback is not possible with the tape recorded in the HDV format.
Playback
Troubleshooting (Continued)