Sony MVC-FD73 - Manual (Page 24)

24-GB
k Changing the mode settings
Recording
File name No. of images that
mode
Recorded file (ex.) can be recorded
MVC– STANDARD FINE
NORMAL JPEG (640
×
480) 001S.JPG
25 - 40 15 - 20
For index screen 001S.411
E-MAIL JPEG (640
×
480) 001S.JPG
JPEG (320
×
240) 001E.JPG 20 - 35 12 - 15
For index screen 001S.411
BITMAP non-compress
001S.BMP
(640
×
480)
1 1
JPEG (640 x 480) 001S.JPG
For index screen 001S.411
MULTI JPEG (960
×
720) 001M.JPG
10 - 15
For index screen 001S.411
Notes
• The file data for index screen is a available only on this camera.
• If you attempt to record 55 images or above, “DISK FULL” appears on the
LCD screen and you cannot record the image even when the remaining disk
capacity indicator is not emptied.
• 1/4-size E-mail files are stored in another folder. The compression ratio is
standard and does not depend on the image quality settings.
• A remaining capacity of about 1MB is needed when recording in BITMAP
mode. After recording the BITMAP picture, “DISK FULL” appears on the
LCD screen.
• In MULTI mode, the program AE, picture effect and focus are fixed to the
selected mode and effect, respectively, and the flash is kept OFF. The focus
may not be right if the zoom is operated. The compression ratio is standard
and does not depend on the image quality settings.
• During playback of a series of images recorded in MULTI mode, the first
image of the nine is displayed one-size smaller than the other normal-sized
images.
• Be sure to play back images recorded in MULTI mode on MVC-FD71/FD73.
Those images cannot be played back correctly on other models.
• When the remaining disk capacity indicator flashes, image data cannot be
recorded.
• A MPEG file cannot be played back correctly on this camera.