Connections, Connecting a pc, Connecting a high-definition (hd) source – Audiovox FPE1507 User Manual

Page 12

Advertising
background image

12

CONNECTING A PC

Connect the 15-pin D-SUB PC/VGA connector from
your computer to the 15-pin D-SUB PC/VGA input
on this unit using a monitor cable (not included).
Connect a stereo audio cable (not included) to
the PC AUDIO IN jack on this unit, and the other
end to the AUDIO OUT jack on your computer’s
sound card.

CONNECTING A HIGH-DEFINITION (HD) SOURCE

High-Definition (HD) Devices with component video output must be connected to the YUV
input.
Connect the three video outputs (Y, Pb, Pr) from the source to the corresponding video inputs on
this unit (Component video cable not included).
Connect the right (red) and left (white) audio output from the source to the right (red) and left
(white) input on this unit (Audio cable not included).
Make sure you connect both audio and video from the same source to YUV IN.

Note: When connecting a DVD player to the
television, the picture resolution is solely
dependent upon the resolution supported by the
DVD player attached. DVD Player resolutions vary
from 480i to 1080i, and this television can support
DVD players up to a maximum resolution of 1080i.

* May require a

subscription for receiving

HD channels, check with

your cable/satellite

service provider for

details.

CONNECTIONS

HD SOURCE

with component video output

(Digital Cable Box*, Satellite Receiver*, or

external over-the-air HD-Tuner)

PLV1615CS1- E1-23.pmd

20/04/2007, 15:35

12

Advertising