Sony PEGA-MSC1 - Manual (Page 8)

8
Installing the necessary software
Before using the Memory Stick Camera Module, install the “Memory
Stick” Camera application software and the PictureGear Pocket Version 2.1
software into your CLIÉ handheld from the supplied CD-ROM.
To install this software, you need a Windows computer which has the
CLIÉ Palm Desktop software installed and which has a connection to your
CLIÉ handheld. Make sure that the local HotSync between the Windows
computer and the CLIÉ handheld works properly.
1
Insert the supplied installation CD-ROM into the CD-ROM
drive of your Windows computer.
The initial installation screen appears.
2
Click [Installation of software for Memory Stick Camera
Module].
The installer submenu appears.
3
Select the software you wish to install.
Select PictureGear Pocket Version 2.1* (required) and CLIÉ Paint
(optional).
* This step is not necessary if PictureGear Pocket Version 2.1 or above
is already installed on your CLIÉ handheld.
4
Click [Install].
5
Select your user name from the user list.
6
Click [Exit].
7
Press the HotSync button on the cradle.
HotSync starts and the software is transmitted to your CLIÉ handheld.