Sony PCG-R505JE - Manual (Page 26)

Change text in this variable definition to document title.
26
6 Push the Release button a second time. The PC Card pops out.
7 Gently grasp the PC Card and pull it out of the slot.
Notes on using PC Cards
❑ For some PC Cards, if you alternate between normal power operation and
the Standby or Hibernate modes while the card is inserted, you may find that
a device connected to your system is not recognized. Reboot your system to
correct the problem.
❑ Some PC Cards may require that you disable idle devices when using the PC
Card. You can use Sony Notebook Setup to disable devices. See “To display
the Sony Notebook Setup screen:” for more information.
❑ Make sure you use the most recent software driver provided by the PC Card
manufacturer.
❑ If an exclamation mark (!) appears on the Device Manager tab in the System
Properties dialog box, remove the software driver and then reinstall it.
❑ You may not be able to use some PC Cards or some functions of the PC Card
with this notebook. If you have difficulty inserting a PC Card, check that you
Removing PC Card
Do not choose a USB disk or a Sony i.LINK optical drive in the Stop a Hardware
device dialog box.
If you removed a Sony i.LINK optical drive by mistake, disconnect the docking
station and reconnect it. See “Disconnecting the notebook from the docking
station” for more information.